DTX logo

 

Thinking Advanced Technologies !!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  펄스UV경화 시스템 (PULSE UV)

 

 

Home > Pluse UV System > Spot Pulse UV  

 

 

     

 

 

SPOT UV 펄스조사기 (SPOT PULSE UV)

 

 

FEATURES

 

• High peak, broadband UV/Vis energy provides rapid curing

• Compact, light weight curing system

• Low heat curing with Instant ON control

• Versatile - many options to match application

• Rugged

• Mercury free environmentally sound technology

 

APPLICATIONS

 

• Fiber Optic Connections

• Lens alignment

• Potting Encapsulation

• Printed Circuit Boards

• Coil Termination

• Ink Marking

• Plastic Bonding

 

GENERAL DESCRIPTION

 

The portable RC-250B curing system rapidly cures a wide range of UV light-initiated adhesives and coatings. This versatile and heavy duty unit is ideal for fast precision curing on the production line as well as for precision rework and prototyping. Since the energy is radiated in intermittent pulses, minimum heat is transmitted to the substrate and temperature sensitive parts will not be damaged.

The RC-250B offers instant ON with high peak power for deep penetration and complete cures. Secure wire and coil terminations are made easily and complex printed circuit boards are easier to repair with the RC-250B.

This unique system is self-contained and requires only a standard 120V, 50/60Hz, 220V, 50/60Hz or 240V, 50/60Hz electrical outlet for operation*. Easy lamp replacement minimizes downtime. Plus, it’s instant on/off is energy efficient resulting in low operating costs.

 

 

Maximum life is obtained from the Pulse UV Lamp because it operates only during curing process. The basic unit comes complete with a 3/8-inch diameter UV light source (option 4), but is also available with a 1-inch x 2.5-inch light port (option 14) or a ¾-inch diameter light guide (option 12). Front panel timer control allows the operator to quickly set the cure time from 0.1 to 4.0 seconds.

 

OPTIONS

 

The RC-250B is available with a range of options to help customize a system:

 

Option 4 - The pulse uv lamp cover is modified with a 3/8-inch diameter quartz rod light guide that concentrates the light output into a small area.

 

Option 5 - A footswitch and 5-foot cable assembly plugs into the connector on the front panel to supplement the standard start switch on the curing wand.

 

Option 12 - ¾-inch diameter quartz rod light guide

 

Option 14 - 1-inch x 2.5-inch light port on the curing head

 

Option 19 - Stand for curing wand

 

Pulse UV Lamps: A, B or C Lamp

 

SAFETY and ENVIRONMENTAL BENEFITS

 

Like all of Xenon Corporations curing systems, Model RC-250B is mercury free. The pulsed UV process is environmentally benign since it does not create or use volatile organic compounds (VOCs) or create suspended airborne particulates.

 

SPECIFICATION

 

SYSTEM

  Curing Wand

Light weight aluminum and plastic containing flash lamp, cooling fan and cure ON switch

  Controller

ABS plastic cabinet containing timer and power supply

 

PULSE UV LAMPS

  A Lamp

370 nm spectral cut-off; best for visible light cures. No ozone generated

  B Lamp

240 nm spectral cut-off; optimum UV performance. No ozone generated.

  C Lamp

190 nm spectral cut-off; cuts off deeper UV. Ozone generated.

 

CURING WAND

  UV Light Footprint

Refer to options 4, 12 and 14

  Pulse UV Lamp Control

Cure ON switch; on time set by controller timer setting

Cure OFF time set internally (refer to Pulse UV Lamp Cooling Cycle specification)

  Cooling

Self-contained fan in curing wand; continuous ON

Cooling air exits from light source in wand and hits surface of product being cured

  Length

363.2 mm x 38.1 mm (H x W)

(14.3 inches x 1.5 inches)

  Cable Length

914.4 mm (3-feet)

 

CONTROLLER

  Pulse UV Lamp Cooling

  Cycle

Factory set 1:4 ratio (example: 1 sec cure : 4 sec cooling)

  Front Panel Controls

 

    System Power

Power ON/OFF Switch

    Pulse UV Lamp Timer

Sets curing time (0.1 to 4.0 seconds)

  Front Panel Displays

 

    Power Status

Red - indicates power is ON; no warm up time required

    Curing Status

Green - indicates system is ready to cure

Red - indicates system is curing

Amber - indicates system is in cooling mode

  Front Panel I/O

9-pin connector provides external control signals for cure start using footswitch and remote control devices   

  Cooling

Internal fan, continuous ON

  Mains Power Input

120 Vrms/220 Vrms/240 Vrms (factory set), 50/60 Hz

15 watts (standby); 485 watts (operating)

  Outline Dimensions

165.1 mm x 317.5 mm x 292.1 mm (H x W x D)

(6.5 inches x 12.5 inches x 11.5 inches)

  Weight

8.16 kg (18 lbs)

 

OPERATING ENVIRONMENT

  Temperature, ambient

0 - 40°C (32°F - 104°F )

  Relative Humidity

10 - 80% (non-condensing)

 

 

Notice : All specifications are typical unless otherwise noted (Tambient @ +24°C, Vinput = 120 Vrms)

            Specifications subject to change without notice.

 

 

 

 

Top of Page

 

 

 

DTX logo

경기도 시흥시 정왕천로 197, A-512 (정왕동  동우디지털파크)   |  E-mail : contact@dtx.co.kr  

Tel : 031-497-1134 (代)   |  Fax : 031-497-1138   |   Internet Fax : 0505-497-7710

 All Rights Reserved, Copyright (C) DTX, INC. 2008   

 

 

FEATURED PRODUCTS

 

 

◎  UV CURING SYSTEM

   ◎   INFRARED DRYING SYSTEM

   ◎  PULSE UV SYSTEM

◎  OPTICAL INSTRUMENTS

   ◎   PHOTONIC SINTERING SYSTEM

   ◎  X-UV SYSTEM

◎  SOLAR SIMULATION SYSTEM

   ◎   WEATHER / FADE TESTING SYSTEM

   ◎  PULSE UV STERILIZATION SYSTEM

◎  XENON IRRADIATION SYSTEM

   ◎   ENGINEERING

   ◎  INSPECTION SYSTEM

◎  LIGHT SOURCE

   ◎   PHOTONIC ACTIVATION SYSTEM